. . . . rf saw filter part number package application last modified 803-rf467.6m-a 3.8 x 3.8 smd cdma450(g-band) rx jan. 01, 2007 type : cdma450(g-band), rf-rx saw filter part number : 803-rf467.6m-a operating conditions / el ectrical characteristics parameters condition minimum typical maximum units center frequency (fo) - - 467.6 - mhz maximum insertion loss 465.2 ~ 470.0 mhz - 2.8 4.8 db stop band attenuation: 0.3 ~ 455.2 mhz 40 50 - db 455.2 ~ 460.0 mhz 35 49 - 490.0 ~ 700.0 mhz 40 50 - 700.0 ~ 1200.0 mhz 30 42 - 1200.0~ 2000.0 mhz 20 35 - source impedence (single ended)* - - 50 - ohm load impendance (single ended)* - - 50 - ohm vswr 465.2 ~ 470.0 mhz - 1.8 2.0 - maximum input power - - - 27 dbm operating temperature - -30 - +80 oc * no matching network package outline (mm) pin layout a ground b in c ground d ground e out f ground test fixture pa g e 1 of 3 oscilent cor p oration rf saw filter | 803-rf467.6m-a
load impedance = 100 ohms source impedance = 50 ohms frequency response vswr smith chart pa g e 2 of 3 oscilent cor p oration rf saw filter | 803-rf467.6m-a
crystal oscillators | quartz crystal | tcxo | vcxo | if saw filter | rf saw filter | ceramic resonator crystal filter | ceramic filter | saw filter / saw devices | site map part no.: 803-rf467.6m-a pa g e 3 of 3 oscilent cor p oration rf saw filter | 803-rf467.6m-a
|
